Keeping your cool is a must these days because there’s a risk of heat strokes and high humidity during the summer months of Ohio. Fortunately, with some TLC, you can help get a well-functioning unit that can keep you very comfortable without adding a lot to your bills. You can also read about heat stroke illnesses when you visit this site here.
Understanding how your cooling system works is going to help you troubleshoot some issues. Most ACs have indoor and outdoor units, and they often consist of a condenser, compressor, and evaporator. They are located differently depending on the brand and model of the air conditioner, and this can also be different when you have heat pumps. Some of the things that you can do to maintain your appliance are discussed below.
-
Filter Replacement and Inspection
Clean everything thoroughly and schedule maintenance services at least four times a year with your AC. You’ll never know the debris, dirt, mold, and dust that have accumulated in your system, so it’s best if you can remove them before they can cause any problems. There are also technicians from Logan A.C. repair in Westerville who can help you with the fixes that you need in your home in Westerville, so consult them if you have questions. They will also help you determine if it’s time for a replacement or not.
You can start to turn off your HVAC, locate the control or service panel, and check the current filters. Permanent ones can often be cleaned with just running water and some soap in your sink, while there are other brands where you’ll need to replace everything. Air-dry the parts before reinserting them back into the system. Disposable ones will mean that you might have to purchase a new filter when you think that the efficiency is declining.
-
Clean and Check the Drain Lines
Condensates will need to get expelled outside, but if you see that there’s pooled water inside the home, then this is the best time for a replacement. Drain trays should have water on them, and you’ll need to empty them when they fill up. However, there are times when there’s a blockage in the form of algae or mold, and they can accumulate in your unit, so this is something that needs addressing.
If you’re going to leave this alone, it can result in a clog and a more expensive repair down the line. You would want to unclog the blockage and access the end of the drain whenever needed. They often run into the garden, gutter, or downpipe, and a vacuum cleaner is going to suck out all the water. Allow your appliance to function like normal and see if the cleaning does the job. If not, it may require some professional assessment, and this is a persistence that you need to address almost immediately.
-
Washing the Appliance
There’s always a right way to clean and wash your AC in your home in Westerville, Ohio, and you’ll need to make sure that you’re not getting the electrical aspects wet. Fan barrels and coils are often susceptible to mildew, and you can often see their presence with their greenish or brownish hue. Also, the rooms tend to smell musty when they are present, and you might also want to utilize a detergent or antibacterial solution to sanitize everything.
If you’re in doubt, call the professionals in Westerville and let them take care of your needs. It’s always a good idea to never power wash your unit and disassemble it in the quickest possible manner. If you’re concerned with the electrical and safety aspects of the job, you can always call a pro that’s going to do most of the leg work on your behalf, so you won’t have to lift a finger.
-
Outdoor Units Need Some Attention Too
There are a lot of brushes, trees, organic matter, objects, and structures that can block and restrict the airflow of your compressor and outdoor unit. This is going to impact the efficiency of the entire system, so you’ll need to remove the obstructions as much as possible. Never place bins, garden equipment, and storage boxes near or around them.
If you notice any plant matter, grime, or dirt, you can simply wipe everything with damp clothes. Never try to wash the coils if you’re unsure of what you’re doing because the reduced fins are going to reduce the ability of your AC to do a proper heat exchange. Incorrect way of washing can also damage a lot of parts, and this can lead to expensive replacements down the line.
You’ll need to be careful with this, especially with the copper piping. Take care of the insulation which is often in the form of white or black foam rubber because they are prone to damage. Check any exposed pipework and contact the pros immediately if needed.